Graduate Program

    Director of Graduate Studies

    Professor W. Wennie Shu

    Application Deadlines for Domestic Students:
      
    Fall semester:
    July 15
    Spring semester:
    November 15
    Summer semester:
    April 15
    Application Deadlines for International Students and Domestic Students Requesting Financial Aid:

    Fall semester:
    February 15
    Spring semester:
    July 15

    NOTE: Early application is recommended.

    Graduate Degrees Offered

    M.S. in Computer Engineering

     

    Areas of focus are: advanced computer architecture and VLSI design, computer networks and systems, image processing, computational intelligence, computer graphics and vision, and bioengineering.

    M.S. in Electrical Engineering

    Areas of focus are: systems and controls, signal processing, image processing, communications, optoelectronics, applied electromagnetics, microelectronics, and bioengineering.

    Course Requirements:
    In addition to all Office of Graduate Studies requirements for the masters degrees, the department also requires at least one credit hour of graduate seminar ECE 590. All candidates for the M.S. degree must satisfactorily pass a final examination, which is the thesis defense for Plan I students and project presentation based on a short term project for Plan II students. Among the required courses (a minimum of 15 hours in ECE for Plan I students and 18 hours in ECE for Plan II students), four courses will be specified by the area of focus chosen by students. Other program information is available at http://ece.unm.edu.

    M.S. in Optical Science and Engineering

    The Optics Program is jointly administered by the Department of Physics and Astronomy and the Department of Electrical and Computer Engineering. It features an internship option under which a student can apply qualified industrial/government laboratory research along with successfully completed course work toward the degree.

    Current research areas: advanced materials, atom optics, biomedical optics, fiber optics, laser physics, lithography, nanostructures, nonlinear optics, optical imaging, optical sensors, optoelectronics, photonic integrated circuits, quantum optics, spectroscopy, and ultra-fast phenomena.

    See the Graduate Interdisciplinary Studies section of the catalog for degree requirements. Other program information is available at http://www.optics.unm.edu.

    Ph.D. in Engineering

    Concentration in Computer Engineering

    Areas of emphasis are: Computer Architecture, High-Performance Computing, Computer Networks and Systems, Image Processing, and Computational Intelligence.

    Course Requirements:
    In addition to the general University doctoral degree requirements listed in the Graduate Program section of the UNM Catalog, students pursuing a Ph.D. must choose an area of emphasis and take three courses (9 hours) from this area of emphasis, one course (3 hours) from another computer engineering or electrical engineering emphasis, and 42 hours of technical electives. The department also requires at least two credit hours of ECE 590, Graduate Seminar. No more than 9 hours of problems courses (ECE 551 or 651) will count toward the Ph.D. Other program information is available at http://www.ece.unm.edu.

    Computer Engineering Core Courses:
    ECE 500, 509, 517, 520, 533, 536, 537, 538, 539, 540, 547, 549.

    Computer Engineering Emphases:

    • Computer Architecture:  ECE 520, 537, 538.
    • High-Performance Computing:  ECE 509, 537, 538
    • Computer Networks and Systems:  ECE 536, 537, 540. 
    • Image Processing:  ECE 537, 577, 641.
    • Computational Intelligence:  ECE 533, 537, 539.

    Concentration in Electrical Engineering

    Areas of emphasis are: Control Systems, Signal Processing, Image Processing, Communications, Optoelectronics, Applied Electromagnetics, and Microelectronics.

    Course Requirements:
    In addition to the general University doctoral degree requirements listed in the Graduate Program section of the UNM Catalog, students pursuing a Ph.D. must choose an area of emphasis and take three courses (9 hours) from this area of emphasis, one course (3 hours) from another computer engineering or electrical engineering emphasis, and 42 hours of technical electives. The department also requires at least two credit hours of ECE 590, Graduate Seminar. No more than 9 hours of problems courses (ECE 551 or 651) will count toward the Ph.D. Other program information is available at http://www.ece.unm.edu.

    Electrical Engineering Core Courses:
    ECE 500, 523, 533, 534, 539, 541, 542, 546, 560, 561, 565, 569, 572, 576.

    Electrical Engineering Areas of Emphasis:

    • Signal Processing:  ECE 500, 539, 541.Image Processing:  ECE 500, 533, 541.
    • Communications:  ECE 500, 541, 542.
    • Optoelectronics:  ECE 561, 570, 572.
    • Applied Electromagnetics:  ECE 534 or 569, 560, 561.
    • Microelectronics:  ECE 520, 523, 576.

    Qualifying Examination

    A student admitted into the Ph.D. program is expected to take the Qualifying examination within three semesters (excluding summer sessions) and pass the Qualifying examination within five semesters (excluding summer sessions) from his/her admittance into the program, unless otherwise determined by the academic advisor and the ECE graduate chair.

    Comprehensive Examination

    All candidates must pass a Final Examination (Defense of Dissertation). The Dissertation Committee conducts the defense of the dissertation.

    Ph.D. in Optical Science and Engineering

    The Optics Program is jointly administered by the Department of Physics and Astronomy and the Department of Electrical and Computer Engineering. Considerable interactions occur with the Center for High Technology Materials and the optical research groups at the Air Force Research Laboratory, Sandia National Laboratories, Los Alamos National Laboratory and other organizations in Albuquerque that offer extensive opportunities for research work toward the degree.

    Current research areas: ultra-fast optics and photonics, laser physics and engineering, optical imaging, quantum optics, optoelectronic devices, fiber lasers and amplifiers, optical communication, optical materials, optical lithography, nonlinear optics, integrated optics, quantum computing, bio-optics, non-photonics, and laser cooling.

    See the Graduate Interdisciplinary Studies section of the catalog for degree requirements. Other program information is available at http://www.optics.unm.edu.

    Nanoscience & Microsystems (NSMS) M.S. & Ph.D. Degree Program

    This department participates in the interdisciplinary NSMS program; for more information, see the Graduate Interdisciplinary Studies section of this catalog.

    Dual Degree Programs– M.B.A. and M.S. in Electrical Engineering or in Computer Engineering

    This dual degree program leading to a Master of Business Administration and a Master of Science in Electrical Engineering or Master of Science in Computer Engineering is aimed at electrical or computer engineering graduate students who have interest in a career that requires graduate level training in both business and electrical or computer engineering. The main advantage of a dual degree program is that it minimizes the time, expense and coursework for earning both graduate degrees, one from the School of Engineering (SOE) and the other from the Anderson Schools of Management (ASM). The advantage is realized by “sharing” courses between the two degrees as stipulated in the program. A requirement of a dual degree program is that both degrees must be earned and granted simultaneously. Hence, one degree is not awarded even if its requirements are fulfilled. Withdrawal from the program entails an application to “restart” down a path that leads to the completion of degree the student desires. In some cases, this may mean additional course requirements.

    The 3/2 M.B.A. ECE Student

    For those Electrical and Computer Engineering students pursuing the 3/2 MBA program, the double master’s program must be entered soon after becoming a graduate student. (See http://mba.mgt.unm.edu/altprograms/32 for more information on the 3/2 M.B.A. program). In addition to fulfilling the M.B.A. requirements from the ASM after receiving the bachelor’s degree from the SOE, the 3/2 Electrical and Computer Engineering student must earn at least eighteen hours in ECE courses including nine hours in an area of study as described in the Plan II requirements of the Electrical and Computer Engineering Graduate Student Handbook. The M.B.A. requirements can be found at the ASM website: http://www.mgt.unm.edu.

    MGMT 501

    (Statistics)– Taken as ECE 340 equivalent

    MGMT 502

    (Accounting)– Taken in senior year

    MGMT 504

    (Micro-economics)– Taken ECON 300 in junior year

    MGMT 506

    (Organizational Behavior)– Taken in senior year

    MGMT 508

    (Ethics)– Taken in senior year

    MGMT 511

    (Technical Communications)– Taken in senior year

       Total

    18 hours

    Requirements to complete M.B.A:
    a) 12 additional hours in core M.B.A. curriculum (MGMT 520, 522, 526, 598)
    b) 12 additional hours in elective M.B.A. courses
    c) Maximum 6 hours (ECE) outside ASM
    d) 48 M.B.A. curriculum hours total.

    M.S. in Electrical Engineering or M.S. in Computer Engineering Student: This means 9 extra
    hours must be taken to obtain the M.B.A. degree for a total of 42 semester hours.

    (See ECE Graduate Handbook for Plan II details):
    a) 18 hours in ECE courses (9 hours in area, maximum of 6 hours at 400 level)
    b) 15 hours of M.B.A. courses
    c) 33 hours total in M.S.Electrical Engineering or M.S. Computer Engineering Plan II program.

    M.B.A. student: This means 12 extra hours must be taken to obtain the M.S. in Electrical Engineering or M.S. in Computer Engineering degree for a total or 42 semester hours.

    The Non-3/2 M.B.A. ECE Student

    The Electrical and Computer Engineering graduate student who did not complete his/her B.S.E.E. or B.S.C.E. degree requirements under the 3/2 M.B.A. program is also eligible to enter the double master’s program. In addition to fulfilling the M.B.A. requirements from the ASM, the non-3/2 ECE graduate student must earn at least eighteen hours in ECE courses including nine hours in an area of study as described in the Plan II requirements of the ECE Graduate Student Handbook. The M.B.A. requirements can be found at the ASM website: http://www.mgt.unm.edu.

    Requirements to complete M.B.A.:
    a) 30 hours in core M.B.A. curriculum (MGT 501, 502, 504, 506, 508, 511, 520, 522, 526, 598, excluding waivers)
    b) 12 additional hours in elective M.B.A. courses
    c) Maximum 6 hours (ECE) outside ASM
    d) 48 M.B.A. curriculum hours total.

    M.S. in Electrical and Computer Engineering or M.S. in Computer Engineering Student:This means 27 extra hours must be taken to obtain the M.B.A. degree for a total of 60 semester hours.
    (Waivers can be earned for ECE 340, ECON 300 and other courses taken during
    undergraduate/graduate programs).

    Requirements to complete M.S. in Electrical Engineering or M.S. in Computer Engineering (see ECE Graduate Handbook for Plan II details):
    a) 18 hours in ECE courses (9 hours in area, maximum of 6 hours at 400 level)
    b) 15 hours of M.B.A. courses
    c) 33 hours total in graduate M.S. in Electrical Engineering or M.S. in Computer Engineering
    Plan II program.

    M.B.A.student: This means12 extra hoursmust be taken to obtain the M.S. in Electrical and Computer Engineering or M.S. in Computer Engineering degree for a total or 60 semester hours.

    Control Systems:  ECE 500, 541, 546.

    Courses

    ECE 101. Introduction to Electrical and Computer Engineering. (1)



    ECE 131. Programming Fundamentals. (3)



    ECE 203. Circuit Analysis I. (3)



    ECE 206L. Instrumentation. (2)



    ECE 213. Circuit Analysis II. (3)



    ECE 231. Intermediate Programming and Engineering Problem Solving. (3)



    ECE 238L. Computer Logic Design. (4)



    ECE **314. Signals and Systems. (3)



    ECE **321L. Electronics I. (4)



    ECE **322L. Electronics II. (4)



    ECE 330. Software Design. (3)



    ECE **331. Data Structures and Algorithms. (3)



    ECE **335. Integrated Software Systems. (3)



    ECE **337. Introduction to Computer Architecture and Organization. (3)



    ECE **338. Intermediate Logic Design. (3)



    ECE **340. Probabilistic Methods in Engineering. (3)



    ECE **344L. Microprocessors. (4)



    ECE 345 . Introduction to Control Systems. (3)



    ECE **360. Electromagnetic Fields and Waves. (3)



    ECE **371. Materials and Devices. (3 to a maximum of 6 ? [3])



    ECE 412. Introduction to Computer Graphics: Scanline Algorithms. (3)



    ECE 413. Introduction to Ray and Vector Graphics. (3)



    ECE 419. Senior Design I. (3)



    ECE 420. Senior Design II. (3)



    ECE 421 / 523. Analog Electronics. (3)



    ECE *424. Digital VLSI Design. (3)



    ECE *432. Introduction to Parallel Processing. (3)



    ECE **435. Software Engineering. (3)



    ECE *437. Computer Operating Systems. (3)



    ECE *438. Design of Computers. (3)



    ECE *439. Introduction to Digital Signal Processing. (3)



    ECE *440. Introduction to Computer Networks. (3)



    ECE *441. Introduction to Communication Systems. (3)



    ECE *442. Introduction to Wireless Communications. (3)



    ECE *443. Hardware Design with VHDL. (3)



    ECE *446. Design of Feedback Control Systems. (3)



    ECE 448 / 548. Fuzzy Logic with Applications. (3)



    ECE 456 / 556. Entrepreneurial Engineering. (3)



    ECE 460 / 560. Introduction to Microwave Engineering. (3)



    ECE *463. Advanced Optics I. (3)



    ECE *464. Laser Physics . (3)



    ECE 469 / 569. Antennas for Wireless Communication Systems. (3)



    ECE *471. Materials and Devices II. (3)



    ECE 474L / 574L. Microelectronics Processing. (3)



    ECE *475. Introduction to Electro-Optics and Opto-Electronics. (3)



    ECE 486 / 586. Design for Manufacturability. (3)



    ECE *487. Semiconductor Factory Design and Operations. (3)



    ECE 490. Internship. (3)



    ECE 491. Undergraduate Problems. (1-6 to a maximum of 6 ?)



    ECE 493. Honors Seminar. (1-3)



    ECE 494. Honors Individual Study. (1-6)



    ECE 495 / 595. Special Topics. (1-4 to a maximum of 9, 1-4 to a maximum of 15 ?)



    ECE 500. Theory of Linear Systems. (3)



    ECE 506. Optimization Theory. (3)



    ECE 509. Parallel Algorithms. (3)



    ECE 510. Medical Imaging. (3)



    ECE 511. Analysis Methods in Functional Magnetic Resonance Imaging. (3)



    ECE 512. Advanced Image Synthesis. (3)



    ECE 513. Real-Time Rendering and Graphics Hardware. (3)



    ECE 514. Nonlinear and Adaptive Control. (3)



    ECE 515. Scientific and Information Visualization. (3)



    ECE 516. Computer Vision. (3)



    ECE 517. Pattern Recognition. (3)



    ECE 518. Synthesis of Nanostructures. (3)



    ECE 519. Theory, Fabrication, and Characterization of Nano & Microelectromechanical Systems (NEMS/MEMS). (3)



    ECE 520. VLSI Design. (3)



    ECE 523 / 421. Analog Electronics. (3)



    ECE 524. Collaborative Interdisciplinary Teaching. (3)



    ECE 528. Embedded Systems Architecture. (3)



    ECE 531. Error-Correcting Codes. (3)



    ECE 532. Nanoscale Electronic and Photonic Devices. (3)



    ECE 533. Digital Image Processing. (3)



    ECE 534. Plasma Physics I. (3)



    ECE 536. Computer System Software. (3)



    ECE 537. Foundations of Computing. (3)



    ECE 538. Advanced Computer Architecture. (3)



    ECE 539. Digital Signal Processing. (3)



    ECE 540. Advanced Networking Topics. (3)



    ECE 541. Probability Theory and Stochastic Processes. (3)



    ECE 542. Digital Communication Theory. (3)



    ECE 545. Digital Control Systems. (3)



    ECE 546. Multivariable Control Theory. (3)



    ECE 547. Neural Networks. (3)



    ECE 548 / 448. Fuzzy Logic with Applications. (3)



    ECE 549. Information Theory and Coding. (3)



    ECE 550. Social and Ethical Issues in Nanotechnology. (1-3 [3])



    ECE 551. Problems. (1-6 to a maximum of 9 ?)



    ECE 553L. Experimental Techniques in Plasma Science. (3)



    ECE 554. Advanced Optics II. (3)



    ECE 555. Foundations of Engineering Electromagnetics. (3)



    ECE 556 / 456. Entrepreneurial Engineering. (3)



    ECE 557. Pulsed Power and Charged Particle Acceleration. (3)



    ECE 558. Charged Particle Beams and High Power Microwaves. . (3)



    ECE 559. Internship in Optical Science and Engineering. (3)



    ECE 560 / 460. Introduction to Microwave Engineering. (3)



    ECE 561. Engineering Electromagnetics . (3)



    ECE 563. Computational Methods for Electromagnetics. (3)



    ECE 564. Guided Wave Optics. (3)



    ECE 565. Optical Communication Components and Subsystems. (3)



    ECE 566. Advanced Optical Subsystems and Networks. (3)



    ECE 569 / 469. Antennas for Wireless Communications Systems. (3)



    ECE 570. Optoelectronic Semiconductor Materials and Devices. (3)



    ECE 572. Semiconductor Physics. (3)



    ECE 574L / 474L. Microelectronics Processing. (3)



    ECE 575. Junction Devices. (3)



    ECE 576. Modern VLSI Devices. (3)



    ECE 577. Fundamentals of Semiconductor LEDs and Lasers. (3)



    ECE 578. Advanced Semiconductor Lasers. (3)



    ECE 580. Advanced Plasma Physics. (3)



    ECE 581. Colloidal Nanocrystals for Biomedical Applications. (3)



    ECE 585. Modern Manufacturing Methods. (3)



    ECE 586 / 486. Design for Manufacturability. (3)



    ECE 590. Graduate Seminar. (1 to a maximum of 2 ?)



    ECE 591. Integrating Nanotechnology with Cell Biology and Neuroscience Seminar. (1, no limit ?)



    ECE 594. Complex Systems Theory. (3)



    ECE 595 / 495. Special Topics. (1-4 to a maximum of 15, 1-4 to a maximum of 9 ?)



    ECE 599. Master?s Thesis. (1-6, no limit ?)



    ECE 609. Advanced Parallel Algorithms. (3)



    ECE 620. Topics in Interdisciplinary Biological and Biomedical Sciences. (3, unlimited ?)



    ECE 637. Topics in Algorithms. (3 to a maximum of 9 ?)



    ECE 638. Topics in Architecture and Systems. (3 to a maximum of 9 ?)



    ECE 642. Detection and Estimation Theory. (3)



    ECE 649. Topics in Control Systems. (3 to a maximum of 9 ?)



    ECE 651. Problems. (1-6 to a maximum of 9 ?)



    ECE 661. Topics in Electromagnetics. (3)



    ECE 699. Dissertation. (3-12, no limit ?)



    Course Search:




    Keyword Search:

    Office of the Registrar

    MSC11 6325
    1 University of New Mexico
    Albuquerque, NM 87131

    Phone: (505) 277-8900
    Fax: (505) 277-6809