The Department of Chemical and Biological Engineering offers programs in chemical engineering leading to the Master of Science and the Doctor of Philosophy degrees. A GPA of 3.0 in the last two years of undergraduate study, and/or in previous engineering graduate study, is normally required for admission. In addition, the GRE is required of all Chemical Engineering applicants.
Students with an undergraduate degree in chemical engineering may directly enter the graduate chemical engineering program. Students from other engineering/science fields are also encouraged to apply. However, certain undergraduate background courses, as determined by the graduate advisor on an individual basis, must be completed as prerequisites to graduate study.
The Department has a variety of established research programs in chemical, biological and materials engineering. These include nano- and biomaterials synthesis, ceramics, bioanalytical micro- and nanosystems, tissue engineering, catalysis, fuel cells, optoelectronic materials, and interfacial and transport phenomena. In many cases, research is done in conjunction with industry and national laboratories. Research is being conducted in a variety of areas, including etching and thin films deposition for microelectronics, fuel cell technology, sol-gel synthesis, CVD thin films, ceramic composites, surface science, catalysis, coal utilization, solar energy, radioactive waste management, ceramics, inorganic membranes, advanced thermal insulation, separation processes and biomedical research.
The principal characterization facilities in the chemical engineering research laboratories provide equipment for: particle size analysis based on sedimentation as well as light scattering, surface area and density measurement of powders, surface analysis via x-ray photoelectron spectroscopy, scanning and transmission electron microscopy, confocal microscopy with hyperspectral imaging, fluorescence and UV-Vis spectroscopy, in-situ IR spectroscopy, thermogravimetric analysis and differential thermal analysis with mass spectrometry, fluid rheology and surface tension measurements and a small angle x-ray scattering facility based on a rotating anode generator and pinhole and Bonse-Hart optics. Additional facilities are available in the Center for Biomedical Engineering (CBME), Center for Emerging Energy Technologies (CEET), Center for Microengineered Materials (CMEM) and the Center for High Technology Materials (CHTM). These include aerosol and catalytic reactors, fuel cell test stations, tissue culture and microbiology laboratories, MOCVD and MBE crystal growth facilities, sol-gel synthesis and optoelectronic materials fabrication and testing.
This department participates in the interdisciplinary Master of Science (M.S.) and Doctor of Philosophy (Ph.D.) programs in Nanoscience and Microsystems Engineering. For more information, see the Nanoscience and Microsystems Graduate Program section of this Catalog.
The department is a participating home department in the Mechanical Engineering department's Master of Engineering in Manufacturing Engineering (M.E.M.E.) program in Manufacturing Engineering. For more information, see the Mechanical Engineering Graduate Program section of this Catalog.
The department participates in the Biomedical Engineering graduate program. For more information, see the Biomedical Engineering section of this Catalog.
The Master of Science (M.S.) in Chemical Engineering degree is offered under both Plan I and Plan II. Under Plan I (thesis), 30 credit hours are required with 24 credit hours of course work and 6 credit hours of thesis. Of the 24 credit hours of course work, 9 credit hours are required at the 500 level with a maximum of 3 credit hours in problems courses. Plan II requires 33 credit hours of course work, including a maximum of 6 credit hours for problems courses and a minimum of 12 credit hours in 500-level courses.
A program that allows the Plan II to be completed in one calendar year is also offered. This program should be requested at the time of application and should begin in the summer or fall semester. The program typically includes a course load of 14 credit hours in the fall semester (two core courses, two electives and graduate seminar), 13 credit hours in the spring semester (two core courses, two electives and graduate seminar) and 6 credit hours in the summer semester (elective courses and/or individual problems).
All candidates for the M.S. degree must satisfactorily pass a final examination which emphasizes the fundamental principles and applications in chemical engineering. This examination is normally the thesis defense for Plan I students, and is normally based on a short term project for Plan II students, including those in the one year program. The examination is conducted by a committee of at least three faculty members. This committee is formed in consultation with the student’s research advisor or project advisor and is approved by the Department Chairperson.
The following courses are required of all M.S. in Chemical Engineering students:
General requirements for the Ph.D. degree are set by the School of Engineering and the Office of Graduate Studies, and are stated on other pages of this Catalog. Required core courses are mentioned above. Students who wish to be admitted to the doctoral program in Chemical Engineering must pass a program qualifying examination. The qualifying examination consists primarily of an oral examination based on a short research proposal developed by the student. Written exams in core subject areas may also be required depending on performance in the core courses. The qualifying exam should be completed as soon as possible after entering the program and completing the core courses. Advancement to candidacy for the Ph.D. degree in Chemical Engineering requires the student to demonstrate potential for independent study and research. A comprehensive examination based on the student’s written research proposal for their dissertation research is used to determine if the student should be advanced to candidacy status.
In addition to the general University doctoral degree requirements listed in the Graduate Program section of this Catalog, students pursing a Ph.D. in Engineering with a concentration in Chemical Engineering must meet the following criteria:
The following core courses are required of all Ph.D. Engineering students who concentrate in Chemical Engineering:
Graduate students interested in obtaining a minor in Chemical Engineering must apply to the program. Forms are available on the department Web site. The student must complete a total of 9 credit hours by choosing three out of the four core courses listed below:
Courses
NONE 101. Introduction to Chemical Engineering and Nuclear Engineering. (1)
An introduction to the professions of chemical engineering and nuclear engineering; current research in these fields; career choices; guidance and advice on curricular matters and effective study techniques for chemical and nuclear engineering students.
NONE 213. Laboratory Electronics for Chemical and Nuclear Engineers. (3)
Basic DC and AC circuits including capacitors and inductors and their applications in radiation measurement equipment and chemical process parameter measurements. Oscilloscopes, Op Amps, and Sensors and their use in the CHNE laboratories.
{Spring}
NONE 230. Principles of Radiation Protection. (3)
Nuclear reactions, decay, interactions of physical radiation with matter, methods of radiation detection and biological effects of radiation, external and internal dosimetry. Open-ended exercises and design project.
Prerequisite: CHEM 121 and CHEM 123L and MATH 162.
{Fall}
NONE 231. Principles of Nuclear Engineering. (3)
Introduction to nuclear engineering and nuclear processes; neutron interactions with matter, cross sections, fission, neutron diffusion, criticality, kinetics, chain reactions, reactor principles, fusion and the nuclear fuel cycle. Includes open-ended exercises.
Prerequisite: CHEM 121 and CHEM 123L and MATH 162.
Corequisite: 314.
{Spring}
NONE 251. Chemical Process Calculations I. (3)
Extensive problem work in material and energy balances for steady state processes. Students will utilize physical properties, chemistry and computer skills to obtain solutions. Detailed examination of case studies demonstrating the fundamentals of process analysis.
Prerequisite: CHEM 122 and 124L.
{Fall}
NONE 253. Chemical Process Calculations II. (3)
Continuation of 251. Unsteady-state material and energy balances; computer solutions to chemical engineering problems using spreadsheets and commercial process plant simulation programs; staged operations for chemical separations.
Prerequisite: 251.
{Spring}
NONE 302. Chemical Engineering Thermodynamics. (4)
Principles of chemical thermodynamics and their applications to energy conversion, phase and reaction equilibrium and the calculation of thermodynamic properties.
Prerequisite: 251.
{Spring}
NONE 310. Neutron Diffusion Theory. (3)
Radioactive decay chains, fission product poison burnup, point reactor kinetics with and without delayed neutrons. Neutron diffusion equation, criticality condition and critical size calculations.
Prerequisite: 231 and MATH 316.
{Spring}
NONE 311. Introduction to Transport Phenomena. (4)
The mechanisms and the related mathematical analysis of momentum and heat transport in both the molecular and turbulent regimes. Similarities and differences between transport types and the prediction of transport properties.
Prerequisite: 231 or 253.
Corequisite: 317.
{Fall}
NONE 312. Unit Operations. (3)
A study of the unit operations involved with momentum and heat transfer. Focus will be on the basics of equipment design and how to synthesize a process from the basic units. Includes extensive use of computer techniques and design exercises.
Prerequisite: 311.
{Spring}
NONE 313L. Introduction to Laboratory Techniques for Nuclear Engineering. (3)
Techniques for error analysis, experiments in fluid flow, heat transfer, neutron detectors and neutron activation plus neutron diffusion theory and Fermi age. Design and development of experiments, emphasis on written presentations.
Prerequisite: ENGL 219
Corequisite: 312
{Spring}
NONE 314. Thermodynamics and Nuclear Systems. (3)
First and second law of thermodynamics and application to electrical generation, particularly nuclear energy conversion systems. Types of nuclear power plants, primary, secondary systems, feedwater, regeneration, and superheating.
Corequisite: 231
{Spring}
NONE 317. Chemical and Nuclear Engineering Analysis. (3)
Application of analytical and numerical techniques to the solution of frequently encountered engineering problems. Included are data analysis and interpretation; problem formulation; solution of ODEs and PDEs encountered in transport phenomena and kinetics; and elementary control theory.
Prerequisite: MATH 316
Corequisite: 311
{Fall}
NONE 318L. Chemical Engineering Laboratory I. (1)
Laboratory experiments in chemical thermodynamics. The lab will include a module on computer aided data acquisition. Students will apply concepts of error analysis and use computer software for interpretation of experimental data.
Prerequisite: 253 and 302.
{Fall}
NONE 319L. Chemical Engineering Laboratory II. (1)
Laboratory experiments in fluids and heat transfer. Students will apply concepts of error analysis and use computational fluid dynamics software for interpretation of experimental data.
Prerequisite: 311.
{Spring}
NONE 321. Mass Transfer. (3)
Continuation of 311. The mechanisms and the related mathematical analysis of mass transport in both molecular and turbulent regimes. Similarities and differences among mass, momentum and heat transport. Predication of mass transport properties. Design of separation systems based on mass transfer.
Prerequisite: 253 and 311.
{Spring}
NONE **323L. Radiation Detection and Measurement. (3)
Radiation interaction with matter and detection techniques for nuclear radiations. Experiments will be performed using gas, scintillation and semiconductor counters and include the design of experiments and identification of unknown radionuclides.
Prerequisite: 230.
{Fall}
NONE *330. Nuclear Engineering Science. (2)
Nuclear reactions, cross sections and reaction rates, quantum effects, atomic structure, nuclear properties, nuclear stability and decay modes.{Spring}
Prerequisite: 230 and 231 and MATH 316 and PHYC 262.
NONE 361. Biomolecular Engineering. (3)
This course introduces concepts and principles of biomolecular engineering as they reflect the chemical engineering discipline. It builds on issues in biological systems to introduce contemporary technology avenues in biochemical, biomaterials, metabolic and tissue engineering.
NONE 371. Introduction to Materials Engineering. (3)
This course develops an understanding of materials from a molecular viewpoint. The structure, properties, and processing of metals, ceramics, polymers, and nanostructured materials are treated in an integrated fashion. Applications include nanotechnology, and biology.
{Spring}
NONE 372. Nuclear Materials Engineering. (2)
Understanding of material behavior from a molecular viewpoint. The effects of structure, properties, and processing of materials used in nuclear systems on their behavior in radiation environments.
{Spring}
NONE 403 / 503. Heterogeneous Catalysis Seminar. (2 to a maximum of 20 Δ)
Discussion of current research in heterogeneous catalysis and materials characterization. Students learn to read the literature critically and to present reviews of ongoing research.
NONE 404 / 504. Nanomaterials Seminar. (2 to a maximum of 20 Δ)
Investigate, evaluate, and discuss current frontier topics in sol-gel synthesis of nanostructured materials through a series of presentations.
NONE 406 / 506. Bioengineering Seminar. (2 to a maximum of 20 Δ)
Emerging bioengineering concepts and applications with emphasis on materials and device technologies.
NONE *410. Nuclear Reactor Theory I. (3)
Neutron transport equation, differential scattering cross section, diffusion approximation, one group diffusion theory including green’s function and eigenfunction expansion, Breit-Wigner formula, slowing down theory, reactor kinetics, multigroup methods, topics selected from numerical methods for reactor analysis.
Prerequisite: 314 and MATH 316.
{Fall}
NONE *413L. Nuclear Engineering Laboratory. (3)
Laboratory investigations of the theory and practice of nuclear chain-reacting systems including open-ended experiments and experimental design, covering reactor kinetics, importance functions and criticality.
One lecture, 6 hours lab.
Prerequisite: 313L and 410.
{Spring}
NONE 418L. Chemical Engineering Laboratory III. (1)
Laboratory experiments in mass transfer and unit operations. Students will plan experiments to study the operation of process equipment such as heat exchanger, distillation columns, etc. Fundamental experiments on mass transfer are also included.
Prerequisite: 312 and 321.
{Fall}
NONE 419L. Chemical Engineering Laboratory IV. (2)
Laboratory experiments in kinetics and process control. Students will also do an in-depth project in their chosen chemical engineering concentration.
Prerequisite: 461.
Pre- or corequisite: 454.
{Spring}
NONE 432. Introduction to Medical Physics. (3)
Basic atomic physics, radiation interactions, image formation, scatter and resolution, x-ray equipment and digital properties, digital imaging, computed tomography, magnetic resonance imaging, ultrasound imaging, radiation oncology principles, brachytherapy, nuclear medicine physics, radiation protection, regulations, and radiation biology.
Restriction: Permission of instructor.
NONE 439 / 539. Radioactive Waste Management. (3)
(Also offered as CE 539)
Introduction to the nuclear fuel cycle emphasizing sources, characteristics and management of radioactive wastes. Types of radiation, radioactive decay calculations, shielding requirements. Radwaste management technologies and disposal options.
{Fall}
NONE 449. Seminar in Hazardous Waste Management. (1, no limit Δ)
Invited lectures on a variety of topics in hazardous waste, environmental engineering and science and related topics. Students prepare short written assignments. May be counted twice toward a degree.
NONE 451 - 452. Senior Seminar. (1, 1)
Senior year. Reports on selected topics and surveys; presentation and discussion of papers from current technical journals, and topics of interest to chemical and nuclear engineers.
{Fall, Spring}
NONE 454. Process Dynamics and Control. (3)
Application of special mathematical techniques to the analysis of chemical processes and the elements of process control. Computer experience suggested.
Prerequisite: 317
{Spring}
NONE **461. Chemical Reactor Engineering. (3)
Elementary principles of chemical reactor design and operation utilizing the kinetics of homogeneous and heterogeneous-catalytic reactions.
Prerequisite: 311 and 317.
{Fall}
NONE 462. Monte Carlo Techniques for Nuclear Systems. (3)
Monte Carlo methods for nuclear criticality and reactor analysis and radiation shielding calculation using production Monte Carlo codes, understand basics of probability and statistics and of particle transport in the context of Monte Carlo methods.
Corequisite: 410.
{Fall}
NONE 464 / 564. Thermal-Hydraulics of Nuclear Systems. (3)
Nuclear system heat transfer and fluid flow; convection in single and two phase flow; liquid metal heat transfer, pressure loss calculations; fuel element design and heat transfer; thermal-hydraulics design of nuclear systems.
Prerequisite: 311 and 313L and 317.
{Fall}
NONE 468 / 568. Introduction to Space Nuclear Power. (3)
Introduction to design and mass optimization of Space Power Systems, passive and active energy conversion systems and design of RTG’s, radiation shield, heat pipe theory, design and applications, advanced radiators, TE-EM pumps and orbital lifetime calculations and safety.
Prerequisite: 231 and 311.
{Spring}
NONE 470. Nuclear Fuel Cycle and Materials. (3)
Materials for use in nuclear reactors, metallurgy and irradiation behavior, fundamentals of the nuclear fuel cycle including the uranium, thorium, and advanced fuel cycles.
{Spring}
NONE 477 / 577. Electrochemical Engineering. (3)
Introduction of the principles of electrochemistry and their applications in materials characterization, corrosion, electro-plating and etching. The course builds on electrochemical kinetics and discusses the design of sensors, batteries and fuel cells.
Prerequisite: 302.
{Spring upon demand}
NONE *485. Fusion Technology. (3)
The technology of fusion reactor systems including basic magnetic and inertial confinement physics; system designs; material considerations; shielding; blanket designs; fuel cycle; plant operations; magnets; and ICF drivers.
Prerequisite: MATH 316.
{Spring}
NONE 491 - 492. Undergraduate Problems. (1-3 to a maximum of 6 Δ)
Advanced studies in various areas of chemical and nuclear engineering.
{Summer, Fall, Spring}
NONE 493L. Chemical Engineering Design. (3)
Principles and practices of chemical engineering design, including process flow sheets, equipment design and specification, process modeling and simulation, economic analysis, and hazard analysis. In-depth design of at least one commercial-scale chemical process.
Prerequisite: 253 and 302 and 312 and 321.
{Fall}
NONE 494L. Advanced Chemical Engineering Design. (3)
Continued practice in creative chemical engineering design, including safety, health and environmental issues. Detailed project on a major open-ended process design or research problem.
Prerequisite: 493L.
{Spring}
NONE 495 - 496. Chemical and Nuclear Engineering Honors Problems I and II. (1-6, 1-6 to a maximum of 6 Δ)
Senior thesis for students seeking departmental honors.
{Summer, Fall, Spring}
NONE *497L. Introduction to Nuclear Engineering Design. (3)
Problem solving techniques, nuclear systems, design, interactions of parameters and the importance of trade-offs and optimization in design. Neutronics, computer models and impact of cross sections and materials on fissile systems.
Two lectures, 2 hours lab.
Prerequisite: 317 or 330 or 410.
{Fall}
NONE 498L. Nuclear Engineering Design. (4)
Students will work in teams on a capstone design project requiring the application of nuclear engineering principles and the integration of material from other disciplines, with emphasis on creativity, decision-making and interactive design.
Three lectures, 3 hours lab.
Prerequisite: 464 and 497L.
{Spring}
NONE 499. Selected Topics. (1-3, no limit Δ)
A course which permits various faculty members to present detailed examinations of developing sciences and technologies in a classroom setting.
{Offered upon demand}
NONE 501. Chemical and Nuclear Engineering Seminar. (1, no limit Δ)
Colloquia, special lectures and individual study in areas of current research. A maximum of 3 credits can be applied toward degree.
{Fall, Spring}
NONE 502. Chemical and Nuclear Engineering Research Methods Seminar. (1)
Students will work on developing research proposals for their masters or doctoral degree. The course will involve oral presentations of proposals and journal article critiques.
{Fall}
NONE 503 / 403. Heterogeneous Catalysis Seminar. (2 to a maximum of 20 Δ)
Discussion of current research in heterogeneous catalysis and materials characterization. Students learn to read the literature critically and to present reviews of ongoing research.
NONE 504 / 404. Nanomaterials Seminar. (2 to a maximum of 20 Δ)
Investigate, evaluate, and discuss current frontier topics in sol-gel synthesis of nanostructured materials through a series of presentations.
NONE 506 / 406. Bioengineering Seminar. (2 to a maximum of 20 Δ)
Emerging bioengineering concepts and applications with emphasis on materials and device technologies.
NONE 507. Surface and Material Engineering. (2 to a maximum of 20 Δ)
Modern concepts of surface science and materials engineering are discussed within the context of surface functionalization, surface analysis, heteroepitaxy, nanocrystal synthesis, and fluidic separation.
2 hours seminar.
{Fall, Spring}
NONE 508. Nuclear Engineering Seminar. (2 to a maximum of 20 Δ)
Discussion of topics such as space nuclear power and propulsion, reactor design thermal-hydraulics, nuclear fuel cycles and materials, energy conversion, computation and simulation, space radiation effects and shielding, criticality safety, and instrumentation and control.
{Fall, Spring, offered upon demand}
NONE 511. Nuclear Reactor Theory II. (3)
The theory of nuclear chain-reacting systems with emphasis on computer methods used in current applications. Multigroup diffusion theory, transport theory and Monte Carlo methods and applications to nuclear system design.
Prerequisite: 410 and 525.
{Spring}
NONE 512. Characterization Methods for Nanostructures. (3)
(Also offered as CHEM, NSMS 512)
Nanostructure characterization methods. Examine principles underlying techniques and limitations, and how to interpret data from each method: electron beam, scanning probe, x-ray, neutron scattering, optical and near field optical. Lab demonstrations and projects provide experience.
NONE 513L. Nuclear Engineering Laboratory II. (1 to a maximum of 4 Δ)
Laboratory investigations of the theory and practice of nuclear chain-reacting systems. Experiments on the UNM AGN-201M reactor and the ACRR at SNL. Course credit based on the extent of related course work in student’s undergraduate program.
One lecture, 6 hours lab.
{Spring upon demand}
NONE 515. Special Topics. (1-3, no limit Δ)
{Offered upon demand}
NONE 518. Synthesis of Nanostructures. (3)
(Also offered as ECE, NSMS 518)
Underlying physical and chemical principles (optics, organic and inorganic chemistry, colloid chemistry, surface and materials science) for nanostructure formation using ‘top-down’ lithography (patterned optical exposure of photosensitive materials) and ‘bottom-up’ self-assembly. Labs will synthesize samples.
Prerequisite: NSMS 510.
{Spring}
NONE 520. Radiation Interactions and Transport. (3)
Theoretical and numerical methods for neutral and charged particle interactions and transport in matter. Linear transport theory, spherical harmonics expansions, PN methods, Gauss quadra, discrete ordinates SN methods, discretization techniques, Fokker-Planck theory. Development of calculational methods including computer codes. Applications to nuclear systems.
Prerequisite: 317 and 410 and 525.
{Spring, upon demand}
NONE 521. Advanced Transport Phenomena I. (3)
Equations of change applied to momentum, energy and mass transfer. Analogies between these phenomena and their limitations. Transport dependent on two independent variables, unsteady state problems.
{Spring}
NONE 523L. Environmental Measurements Laboratory. (1 to a maximum of 4 Δ)
In-depth consideration of radiation detection systems and nuclear measurement techniques. Experiments using semiconductor devices, MCA/MCSs, sampling techniques, dosimeters, tracer techniques and radiochemistry. Emphasis on selection of sampling techniques and instrumentation for measuring low-levels of radiation in air, soil and water. Course credit determined for each student based on the extent of related laboratory work in his or her undergraduate program.
Two lectures, 3 hours lab.
{Fall}
NONE 524. Interaction of Radiation with Matter. (3)
Nuclear models and energy levels, cross sections, decay processes, range/energy relationships for alphas, betas, gammas, neutrons and fission products. Ionization, scattering and radiative energy exchange processes. Effect of radiation on typical materials used in the nuclear industry. Both theory and application will be presented.
Prerequisite: 330 and MATH 316.
{Fall}
NONE 525. Methods of Analysis in Chemical and Nuclear Engineering. (3)
Mathematical methods used in chemical and nuclear engineering; partial differential equations of series solutions transport processes, integral transforms. Applications in heat transfer, fluid mechanics and neutron diffusion. Separation of variables eigen function expansion.
{Fall}
NONE 527. Radiation Biology for Engineers and Scientists. (3)
(Also offered as MPHY 527)
Covering fundamentals of the biological effects of ionizing radiation on living systems, especially man; basic biological mechanisms which bring about somatic and genetic effects; and the effect of ionizing radiation on cell cultures.
Restriction: permission of instructor.
NONE 528. External Radiation Dosimetry. (3)
Ionizing radiation, Kerma, Fluence, Dose, and Exposure, Attenuation and Buildup, Charged Particle Equilibrium, Bragg-Gray Cavity Theory and other Cavities, Fundamentals of Dosimetry, Ionizations Chambers, Integrating Dosimetry, and Pulse Mode Detectors, and Neutron Interactions and Dosimetry. Both theory and applications will be presented.
Pre- or corequisite: 524.
{Spring}
NONE 529. Internal Radiation Dosimetry. (3)
Internal contamination, radiation quantities, ICRP dose methodologies, lung models, bioassay, whole body counting, uranium and plutonium toxicology and metabolism, alpha dosimetry and ventilation control/air sampling.
Prerequisite: 524.
{Fall}
NONE 530. Surface and Interfacial Phenomena. (3)
Van Swol
(Also offered as NSMS 530)
Introduces various intermolecular interactions in solutions and in colloidal systems; colloidal systems; surfaces; interparticle interactions; polymer-coated surfaces; polymers in solution, viscosity in thin liquid films; surfactant self-assembly; and surfactants in surfaces.
NONE 539 / 439. Radioactive Waste Management. (3)
(Also offered as CE 539)
Introduction to the nuclear fuel cycle emphasizing sources, characteristics and management of radioactive wastes. Types of radiation, radioactive decay calculations, shielding requirements. Radwaste management technologies and disposal options.
{Fall}
NONE 542. Advanced Chemical Engineering Thermodynamics. (3)
Advanced thermodynamics with reference to its application in chemical engineering.
{Fall}
NONE 550. Social and Ethical Issues in Nanotechnology. (3)
(Also offered as ECE, NSMS 550.)
In this course, students will examine issues arising from this emerging technology, including those of privacy, health and safety, the environment, public perception and human enhancement.
NONE 551 - 552. Problems. (1-3, 1-3 each semester Δ)
Advanced study, design or research either on an individual or small group basis with an instructor. Recent topics have included convective diffusion, reactor safety, inertial confinement fusion and nuclear waste management.
NONE 560. Nuclear Reactor Kinetics and Control. (3)
Theory of the kinetic behavior of a nuclear reactor system with emphasis on control and dynamic behavior.
Prerequisite: 410 and 525.
{Offered upon demand}
NONE 561. Kinetics of Chemical Processes. (3)
Rate equations for simple and complex chemical processes, both homogeneous and heterogeneous. Experimental methods and interpretation of kinetic data for use in chemical reactor design and analysis. Applications to complex industrial problems.
{Spring}
NONE 564 / 464. Thermal-Hydraulics of Nuclear Systems. (3)
Nuclear system heat transfer and fluid flow; convection in single and two phase flow; liquid metal heat transfer, pressure loss calculations; fuel element design and heat transfer; thermal-hydraulics design of nuclear systems.
{Fall}
NONE 568 / 468. Introduction to Space Nuclear Power. (3)
Introduction to design and mass optimization of Space Power Systems, passive and active energy conversion systems, and design of RTG’s, radiation shield, heat pipe theory, design and applications, advanced radiators, TE-EM pumps and orbital lifetime calculations and safety.
Prerequisite: 231 and MATH 316.
{Spring}
NONE 575. Selected Topics in Material Science. (1-3, no limit Δ)
May be counted an unlimited number of times toward degree, with departmental approval, since content varies. Credit is determined based on the content of the course.
{Offered upon demand}
NONE 576. Selected Topics in Aerosol Science. (3 to a maximum of 6 Δ)
Analysis of the motion of both charged and neutral aerosol particles; molecular and convective diffusion, particle size and classification, coagulation, precipitation and particle capture, current aerosol research and instrumentation.
{Offered upon demand}
NONE 577 / 477. Electrochemical Engineering. (3)
Introduction of the principles of electrochemistry and their applications in materials characterization, corrosion, electro-plating and etching. The course builds on electrochemical kinetics and discusses the design of sensors, batteries and fuel cells.
Prerequisite: 302, 461.
{Spring upon demand}
NONE 582. Inertial Confinement Fusion. (3)
Theory and technology of inertial confinement fusion, including target physics: laser and particle beam physics and technology; reactor engineering.
Pre- or corequisite: 534.
{Offered upon demand}
NONE 586. Statistical Design of Experiments for Semiconductor Manufacturing. (3)
Statistical tools for collection, analysis, and interpretation of data. Design and control of processes for semiconductor manufacturing. Analysis of variance; randomization, replication, blocking; full-factorial, response-surface, nested, split-lot, Taguchi designs; utilization of RS/1 software.
NONE 591. Practicum. (6)
Also offered as MPHY 591. Professional practice experience in radiation protection and environmental measurements in non-traditional settings under the guidance of health physicists and radiation protection engineers. Internship arrangement with a local facility employing health physicists or related personnel such as a national laboratory, analytical facility, or hospital.
{Summer, Fall, Spring}
NONE 599. Master's Thesis. (1-6, no limit Δ)
See Graduate Programs section for total credit requirements.
Offered on a CR/NC basis only.
NONE 610. Advanced Nuclear Reactor Theory. (3)
Advanced numerical methods in neutral and charged particle transport, including discontinuous finite element methods, structured and unstructured grids, adjoint techniques and Monte Carlo methods.
Prerequisite: 511.
{Fall 2005 and alternate years}
NONE 699. Dissertation. (3-12, no limit Δ)
See Graduate Programs section for total credit requirements.
Offered on a CR/NC basis only.
